Humbrol Thinner

Topics, whether armour related or not, can be posted here.

Humbrol Thinner

Postby David Madsen » Tue Dec 07, 2010 3:38 pm

So I want to experiment with different brands of paints, currently I work with just acrylic Tamiya paints. I've seen that Humbrol is another often used brand wanted to see what I can do with those. However, I am having a hard time finding a larger can on Humbrol thinner for the enamel paints available in the US. I can find the very small bottles but I'd like something more bulk, like the 125ml + cans. Any clues where I can get them or could I substitute using a white spirit? Also, could someone direct me to a primer that I could buy in something bulk that I can shot through an airbrush rather than aerosol can? Thanks much.
User avatar
David Madsen
 
Posts: 344
Joined: Mon Nov 22, 2010 7:50 pm
Location: Iowa, USA

Re: Humbrol Thinner

Postby Tim Gillis » Tue Dec 21, 2010 11:33 pm

I have no idea what you can get for a bulk primer you can spray through a brush, but Humbrol paints can be thinned with any oil based thinner, I use testors enamel and or hardware store laquer thinner with them no problem.
Sanity is a matter of opinion
User avatar
Tim Gillis
 
Posts: 17
Joined: Thu Dec 16, 2010 12:52 pm
Location: Nanton, Alberta

Re: Humbrol Thinner

Postby David Madsen » Wed Dec 22, 2010 3:03 pm

I'll have to try and see what store bought thinner will do. I have lacquer thinner but I think that breaks down enamels more and might not work well. I've read through random forums that mineral spirits (white spirits) might be the best way to go. It's my only option since I can't seem to find humbrol thinner sold in the US. Just thought I'd see if there was anyone in the US that knows of the place. Thanks for your help!
User avatar
David Madsen
 
Posts: 344
Joined: Mon Nov 22, 2010 7:50 pm
Location: Iowa, USA

Re: Humbrol Thinner

Postby Jamie Tainton » Wed Dec 22, 2010 4:58 pm

I also just use white spirits (paint thinner) but was using the Humbrol thinner till I ran out. I like using the brand of thinner for brand of paint , even if it costs a bit more, but Humbrol you can thin with paint thinner. You can also use laquer thinner but this need s some practice so you don't get a pebbly surface.

As for primer the aerosol Tamiya primers are great. Or you could try using some thinned down Mr. Surfacer, using lacquer thinner to thin it.
I would recommend either really good ventilation and/or a respirator when spraying!
"Don't believe everything you think"
User avatar
Jamie Tainton
Site Admin
 
Posts: 2094
Joined: Wed Aug 19, 2009 1:01 pm
Location: Vancover BC Canada

Re: Humbrol Thinner

Postby David Madsen » Thu Dec 23, 2010 6:58 am

Thanks Jamie, I will keep that in mind. I also like the idea of using the brand of thinners with the same brand of paint but I just can't find any other than a small 20ml can which just won't be enough and very expensive.
User avatar
David Madsen
 
Posts: 344
Joined: Mon Nov 22, 2010 7:50 pm
Location: Iowa, USA


Return to General

Who is online

Users browsing this forum: No registered users and 9 guests

cron