I wanted the Washes and Filters to be completely dry before I take pics.
For the Washes I used MIG´s Dark Wash.
When this had dried (I waited two days to be sure they were completely dry), I applied a protective coat of Vallejo Satin Finish.
A day later I started to apply a Filter using Testors Olive Drab, another day later a Filter using Testors Military Brown. Both were thinned down with Testors own thinner (take care not to use the Airbrush thinner, that stuff is way too aggressive!!!)
As you maybe can see, I started the Chipping as well.
I guess this will be the last time (before the "Roll-out") I assembled everything for the pics, since I will start with some Pigments over the next couple of days.
I´ll keep you updated
.
I hope you like it this far.
